TXR1020
Teslaman TXR1020 series high-voltage power supply is equipped with digital voltage and current indicators, which can be installed in a 19" standard cabinet. It can achieve a linear and stable rise of high-voltage output. The TXR1020 series power supply can also be connected to an external potentiometer to realize remote control of output voltage and current. And it has the functions of external voltage and current display, high voltage output with overvoltage and short circuit protection, safety interlock, etc. TXR1020 can also be used in X-ray machines, choose to increase the output DC voltage 0~5.5V current 0.3A to 10A optional filament Power supply. Note: Teslaman TXR1020 series high voltage power supply is only suitable for fixed load, not less than one-fifth of the rated load.
Typical Application：X-ray machine, electrostatic spraying, capillary electrophoresis, electrostatic fleece, scientific experiments, etc.
Back to list
Features
- Output voltage from 1kV to 150kV
- integrated optional filament power supply
- overvoltage and output short circuit protection
- voltage and current regulation functions
- the emission current can be adjusted remotely
- safety interlock function
- can be customized according to user requirements
CONTACT US
Telephone：+86411-84754722
Mobile：+8615642371743
Wechat：15642371743
Email：chengxingqi@teslamanhv.com
URL：www.teslamanhv.com
Product Specifications
Input
220V±10% AC 50/60Hz.
Output
The highest voltage output from 1kV to 150kV is optional, and the 0V to the highest voltage is adjustable.
Voltage Control Power Panel
The multi-turn potentiometer that comes with the power panel can set the output voltage between 0V and the highest voltage.
Voltage control External remote control
An external 0 to 10V control signal can adjust the output from 0V to the highest output voltage.
Tube current control (X-ray machine application) Power panel
The multi-turn potentiometer that comes with the power supply can set the electron beam current from 0A to the highest current.
Tube current control (X-ray machine application) External remote control
The external 0 to 10V control signal can set the electron beam current from 0A to the highest current.
Voltage regulation Relative load
0.01% (no load to rated load).
Voltage regulation Relative input
±0.01% (input voltage change is ±10%).
Current regulation relative load
0.01% (no load to rated load).
Current regulation Relative input
±0.01% (input voltage change ±10%).
Ripple voltage
under the premise of outputting the rated voltage, the peak-to-peak value of the ripple voltage is 0.1% of the highest output voltage (smaller ripple is optional).
Ambient temperature
0°C to +45°C during operation. Storage -20°C to +80°C.
Temperature coefficient
0.01% per degree Celsius.
Stability
less than 0.1% every 8 hours after starting for half an hour (higher stability optional).
Voltage and current indication
0 to 10V, 1% accuracy under rated output conditions.
Dimensions
width 483mm, height 88/132mm, depth 280/324/468/709mm.
High-voltage output connector
The recessed epoxy resin insulating conduit and the probing high-voltage cable are connected through a metal connector with a diameter of 16mm. The effective length of the high-voltage cable is 1 meter.
Input and output connectors
20-pin terminal block contains control and display signals.
Remote control of output voltage and current
An external potentiometer can be used to remotely control the output voltage and current using the power supply 10W-300W, 1kV to 150kV, high precision, digital voltage and current indication, and the internal 10V voltage reference.
Remote voltage and current indication
The 20-pin terminal block contains 0 to 10V voltage and current indication signals, which can be connected to various digital or pointer meters.