TXF1068
Teslaman TXF Series X-ray High Voltage Power Supply Set Standard 1.8 kW-6kW Compact High Performance X-ray High Voltage Power Supply. The output voltage ranges from 160kV to 450kV in negative, positive, or bipolar output configurations, and active power factor correction circuits reduce input current requirements while minimizing relative input correlation with EMI. USB Ethernet based on DSP control circuit to provide you with SMT selection. And RS-232 communication interface, as well as simulation simplifies OEM system integration. The two DC output, current-regulated filament power supply provides accurate and stable X-ray tube power supply through a complex emission current regulation control circuit.
Typical Application：X-ray generator, nondestructive testing.
Reference Back to list
Features
- Output Voltage From 160kV to 450kV
- Completion X-ray Generator
- Power Factor Correction AC Input Circuit
- Integrated Dual Filament Supply
- Digital Interface USB
- Ethernet And RS-232
- Have Stability And Regulation
- OEM Customization Available
CONTACT US
Telephone：+86411-84754722
Mobile：+8615642371743
Wechat：15642371743
Email：chengxingqi@teslamanhv.com
URL：www.teslamanhv.com
Product Specifications
Input
180-264V ± 10% AC.
Single phase
47-63Hz.
Input Current
6kW, 208V ± 10% AC.
Output Voltage
160kV, 225kV, 320kV, 450kV.
Output Polarity
Inside the power supply
The multi-turn potentiometer provided by the power supply can set the output voltage between 0V and the highest voltage.
External remote control
External 0 to 10V control signal can output from 0V adjust to the maximum output voltage.
Emission Current Control
Inside the power supply
The multi-turn potentiometer of the power supply can set the electron beam current from 0A to the maximum current.
External remote control
The external 0 to 10V control signal can set the electron beam current from 0A to the maximum current.
Voltage Regulation Rate
Relative load
± 0.1% (no load to rated load).
Relative input
± 0.1% (input voltage varies from 30% to 100% of rated output voltage).
Current Adjustment Rate
Relative load
0.05% (no load to rated load).
Relative input
0.05% rated output voltage exceeds the specified input voltage range.
Ripple Voltage
Peak-peak of ripple voltage under the condition of output rated voltage The value is 0.25% of the maximum output voltage.
Environmental
Operational
0 ℃ to + 50 ℃.
Storage
-20 ℃ to + 80 ℃.
Temperature Coefficient
0.5% per degree Celsius.
Stability
It is less than or equal to 0.1% every 8 hours after starting up for half an hour.
Overall Dimensions
770mm long, 422mm wide and 396mm high.
Connectors
High voltage output connectors- recessed epoxy insulated conduits and The penetrated high-voltage cable passes through metal with a diameter of 16mm. Connector connection. The total length of high voltage cable is 1m.