TPS7071
Teslaman TPS7071 series is a 19"standard rack-mounted high-type high-voltage power supply with low ripple, high stability and high precision. After 8 hours of long-term testing, the ripple is less than 10ppm (measured 25mV) and the stability is better than 10ppm. At low power (≤200W), the ripple is less than 1ppm. Higher parameter indicators are required to be customized.
Typical Application:Semiconductor testing,Material analysis,Electrostatic applications,Electron microscope,Scientific research.
Reference Back to list
Features
- Output voltage 5kV
- Output power 2kW
- Ripple is less than 10ppm
- Stability is better than 10ppm
- Overvoltage overcurrent short circuit arc and overtemperature protection
- Higher indicators require customization
CONTACT US
Telephone:+86411-84754722
Mobile:+8615642371743
Wechat:15642371743
Email:chengxingqi@teslamanhv.com
URL:www.teslamanhv.com
Product Specifications
Input
AC220V±10%, 50/60Hz, 10A.
Output
Output voltage 5kV, output power2kW. 0 to the highest voltage is continuously adjustable, and the output negative polarity.
Front panel status instructions
High voltage on, high voltage off, voltage and current display, constant voltage and constant current mode display.
Voltage control
The power supply comes with a rotary encoder that can set the output voltage between 0 and the highest voltage.
External analog control
The external 0 to 10V control signal can adjust the output from 0 to the maximum output voltage.
Digital communication control
Through the RS-485 communication interface, the output can be adjusted from 0 to the highest voltage according to the standard Modbus communication protocol.
Current control
The power supply comes with a rotary encoder that can set the output current between 0 and the maximum current.
External analog control
The external 0 to 10V control signal can adjust the output from 0 to the maximum current.
Digital communication control
Through the RS-485 communication interface, the output can be adjusted from 0 to the maximum current according to the standard Modbus communication protocol.
Voltage adjustment rate
Relative load
0.01% (no load to rated load).
Relative input
±0.01% (input voltage change is ±10%).
Current adjustment rate
Relative load
0.01% (no load to rated load).
Relative input
±0.01% (input voltage change is ±10%).
Ripple voltage
Under rated output conditions, it is better than 10ppm (p-p).
Ambient temperature
Working 0℃ to +50℃. Storage -20℃ to +80℃.
Stability
0.5 hours after booting, less than 0.1% every 8 hours.
Temperature coefficient
Voltage and current are better than 100ppm/℃.
Humidity
10-90% without condensation.
Voltage and current indication
Four-bit LED digital tube with ±1% accuracy under rated output conditions.
External dimensions
482mm wide, 178mm high and 660mm deep.
High-voltage output line
Power supply comes with shielded coaxial cable, wire length2 meters, non-detachable
Weight
10 to 20kg.