TPS7070
Teslaman TPS7070 series is a 19 "standard rack high voltage power supply with low ripple, high stability and high precision. After 8 hours of long-term testing, the ripple is less than 10ppm (measured 25mV) and the stability is better than 10ppm. At low power (≤200W), the ripple is less than 1ppm. Higher parameter index requirements can be customized.
Typical Application：Semiconductor testing, Material analysis, Electrostatic application,Electron microscope, Scientific research.
Reference Back to list
Features
- Output voltage 5kV
- Output power 1kW
- The ripple is less than 10ppm. Stability is better than 10ppm
- Over-voltage
- over-current
- short circuit
- arc and over-temperature protection
- Higher index requirements can be customized.
CONTACT US
Telephone：+86411-84754722
Mobile：+8615642371743
Wechat：15642371743
Email：chengxingqi@teslamanhv.com
URL：www.teslamanhv.com
Product Specifications
Input
AC 220v 10%, 50/60Hz, 10A.
Output
output voltage 5kV, output power 1kW. 0 to the highest voltage continuously adjustable, output negative polarity.
Front panel status indication
High voltage on and off, voltage and current display, constant voltage and constant current working mode display.
Voltage control
The power supply comes with a rotary encoder that can set the output voltage between 0 and the highest voltage.
External analog control
The external control signal from 0 to 10V can adjust the output from 0 to the highest output voltage.
Digital communication control
the output can be adjusted from 0 to the highest voltage through RS-485 communication interface according to standard Modbus communication protocol.
Current control
The power supply comes with a rotary encoder that can set the output current between 0 and the highest current.
External analog control
The external control signal from 0 to 10V can adjust the output from 0 to the maximum current.
Digital communication control
the output can be adjusted from 0 to the maximum current through RS-485 communication interface according to standard Modbus communication protocol.
Voltage regulation rate
Relative load
0.01% (no load to rated load).
Relative input
0.01% (input voltage changes by 10%).
Current regulation rate
Relative load
0.01% (no load to rated load).
Relative input
0.01% (input voltage changes by 10%).
Ripple voltage
Under the rated output condition, the peak-to-peak value of ripple voltage is 10ppm.
Ambient temperature
Working time
0℃ to +50℃.
Storage
-20℃ to +80℃.
Stability
10ppm.
Temperature coefficient
10ppm.
Humidity
10-90% non condensation.
Voltage and current indication
Four-position LED digital tube with accuracy of 1% under rated output
conditions. Overall dimensions
482mm wide, 178mm high and 660mm deep.
High-voltage output line
the power supply comes with shielded coaxial cable, which is 2 meters long and cannot be plugged in.
Weight
10 to 20kg.