TAC4010
Teslaman TAC4010 Series High Voltage AC Power Supply, Output voltage up to ±20kV sinusoidal wave. The output AC voltage and frequency can be continuously adjusted, and the output AC voltage, frequency and current can be displayed through the front panel digital display meter. In addition, this power supply also has over-voltage and over-current protection function, which makes the performance of the power supply more stable and can well meet the needs of users.
Typical Application：Ion implantation, Hi-POT test, Plasma, Alternating current electrostatic field, Leakage detection, Withstand voltage test, etc.
Reference Back to list
Features
- Output Voltage 5kV-40kV peak to peak
- Output Power 1kW
- Overvoltage
- Overcurrent and Short Circuit Protection
- The center frequency is optional from 5kHz to 30kHz
- and the center frequency is adjustable by 10%
- Voltage and current regulation function
- Security interlock function
- OEM customization available
CONTACT US
Telephone：+86411-84754722
Mobile：+8615642371743
Wechat：15642371743
Email：chengxingqi@teslamanhv.com
URL：www.teslamanhv.com
Product Specifications
Input
AC220V±10%, 50Hz.
Output
A variety of maximum output voltages from 5kV to 40kV are optional, and the maximum output power is 1kW. 0 to the highest voltage continuously adjustable.
Voltage control Inside the power supply
The multi-turn potentiometer that comes with the power supply panel can set the output voltage between 0 and the highest voltage.
Voltage control External remote control
An external 0 to 10V control signal can adjust the output from 0V to the highest output voltage.
Frequency control Inside the power supply
The multi-turn potentiometer that comes with the power supply can set the frequency between ±10% of the center frequency.
Frequency control External remote control
External 0 to 10V control signal can set the frequency between ±10% of the center frequency.
Center frequency range
5kHz-30kHz (±10% adjustable).
Voltage regulation relative load
0.5% (no load to rated load).
Voltage regulation Relative input
±0.5% (input voltage change is ±10%).
Current regulation rate Relative load
0.5% (no load to rated load).
Current regulation Relative input
±0.5% (input voltage change is ±10%).
Stability
less than 0.5% every 8 hours after power on for 0.5 hours.
Voltage and current indication
0 to +10V, 1% accuracy under rated output conditions.
High-voltage output connector
The recessed epoxy resin insulating conduit and the probing high-voltage cable are connected through a metal connector with a diameter of 16mm. Standard high voltage cables are 2 meters long.
Ambient temperature During operation
0°C to +50°C.
Ambient temperature During storage
-20°C to +80°C.
Temperature coefficient
0.01% per degree Celsius.
Dimensions
width 482mm, height 133.5mm, depth 380mm.
Remote control of output voltage and current
An external potentiometer can be used to remotely control the output voltage and current using the internal 10V reference voltage of the power supply.