TXF1270
The Teslaman TXF1270 series X-ray high voltage power supply is a compact power supply with negative, positive, or bipolar output options, with a power range from 1.8 kW to 6.0 kW, and an output voltage range of 160 kV to 450 kV, suitable for various application needs. The power supply adopts an active power factor correction circuit, with a high power factor and low input current, and reduces line-related electromagnetic interference to a minimum. TXRV1270 adopts a proprietary inverter topology technology to make the power supply more efficient and higher in power density. The high-voltage part of the power supply is packaged in a solid- state way to reduce volume and weight and improve the reliability and maintenance convenience of the product. The power supply uses DSP technology based on SMT control circuits and provides various interfaces such as USB, RS-232, Ethernet, and analog signals to facilitate integration into OEM systems. The power supply has two DC outputs, and the stable emission current regulation circuit controls the filaments power supply,providing precise and stable current to the X-ray tube. In addition, the power supply also has a comprehensive fault diagnosis circuit, arc monitoring, arc extinguishing, and arc counting functions.
Typical Application：Non-destructive testing,X-ray scanning,Secure applications,Medical applications
Reference Back to list
Features
- 160kV
- 225kV
- 320kVand450kV Model
- Build in PFC curcuit
- Integrated double filament power supply
- Digital interface USB
- Ethernet and RS-232
- Excellent stability and adjustment
CONTACT US
Telephone：+86411-84754722
Mobile：+8615642371743
Wechat：15642371743
Email：chengxingqi@teslamanhv.com
URL：www.teslamanhv.com
Product Specifications
Input Voltage
1.8kW,3.0kW,4.0kW and 4.5kW Model
180-264Vac,single phase,47- 63 Hertz,active power factor corrected input to ≥0.98
6.0kW Model
208 or 400Vac, ±10%, three phase, 47-63 Hertz, passive power factor corrected
Input Current
1.8kW,3.0kW,4.0kW and 4.5kW models
<30 amps
6.0kW models
<25 amps per phase
Output Voltage
Accuracy
0.25%
Stability
≤ 0.1% per 8 hours, after 1 hour warm up
1.8kW, 3.0kW, 4.0kW and 4.5kW models
Load
±0.05% of rated output voltage for a full load change
Line
±0.05% of rated output voltage over specified input voltage range
6.0kW models
Load
±0.1% of rated output voltage for a full load change
Line
±0.1% of rated output voltage over specified input voltage range
Temperature Coefficient
1.8kW, 3.0kW, 4.0kW and 4.5kW models
50ppm/°C
6.0kW models
±50ppm/°C
Emission Current
Accuracy
0.25%
Stability
100ppm/°C
1.8kW, 3.0kW, 4.0kW and 4.5kW models
Load
±0.05% of rated output current for a change from 30% to 100% of rated output voltage
Line
±0.05% of rated output current over specified input voltage range
6.0kW models
Load
±0.1% of rated output current for a change from 30% to 100% of rated output voltage
Line
±0.1% of rated output current over specified input voltage range
Filament
Output
0-6 amps at a compliance of 10Vdc, maximum
Dual Focal Spot
Small and large, selectable via interface signal
Configuration
DC filament drive. Closed loop emission control regulates filament setting to provide desired X-Ray tube emission current
Output Polarity
Specify the positive or negative polarity when ordering.
Voltage Adjustment Rate
Relative load
full load change, rated output voltage±0.1%。
Control Interface
Remote interface
Analog, USB, Ethernet and RS- 232
Control software
For RS-232/USB It provides a VB GUI Program, Ethernet The interface has an embedded applet for control.
Environment
Temperature range
Work
0°C To +50°C
Storage
-40°C To +85°C
Mains Input Connector
1.8kW, 3.0kW, 4.0kWAnd4.5kW
Model number
Type97-3102A-24-11P
6.0kW Model Number
Type97-3102A-24-22P
Interface Connector
Digital—Ethernet, RS-232 and USB Analog—25 pin connector
Cooling
Forced air
Regulatory Approvals
Compliant to EEC EMC Directive/Compliant to EEC Low Voltage Directive, all but 6000 watt unit. NFC 74-100 compliant. UL/CUL recognized, File E227588, All but 6000 watt unit. RoHS Compliant.