TXP1310
Teslaman’s TXP1310 redefines the standard for high performance, low cost Mammography X-Ray generators. TXP1310 X-Ray generator integrates a dual filament power supply and a dual speed starter. A DC current source filament power supply provides fast rise times with stable and accurate X-Ray tube emission currents. The solid encapsulated high voltage output section eliminates oil concerns while reducing the effects of environmental humidity and contamination. Flexibility in interfacing is provided via RS-232 and optional Ethernet connectivity. The VMX supports advanced mammography application features including Smart AEC Exposure, Automatic Filament Calibration, Tube Anode Heat Calculator and user configurable Tube Library. Compact, full featured, high performance, low cost. TXR1310, the next generation Mammography X-Ray generator.
Typical Application：Mammography
Reference Back to list
Features
- Custom Designed Specifically for Mammography Applications
- Fast Settling Helps Minimize Patient Radiation Exposure
- Dual Speed Starter Boost/Brake Capability
- RS-232 and optional Ethernet interface
- Low-cost and value-added design
CONTACT US
Telephone：+86411-84754722
Mobile：+8615642371743
Wechat：15642371743
Email：chengxingqi@teslamanhv.com
URL：www.teslamanhv.com
Product Specifications
Input voltage
220VAC ±10%, single phase, 50Hz/60Hz.
Input current
Minimum 35A service recommended for 5kW operation
Output voltage range
20kV to 40kV
Polarity
Positive, grounded cathode X-Ray tube
Accuracy
Within 1% of programmed values
Repeatability
<0.5%.
Stable time
<10ms.
Ripple
≤ 1%
Stability
≤ 0.01% per 8 hours
Temperature Coefficient
100ppm/℃.
Output current range
10mA to 200mA.
Output power
5kW@0.1 second loading time
Maximum mAs
600mAs
Exposure timer
5ms-10Small size.
Accuracy
Within 2% of programmed values measured after mA rises to stable DC level
Repeatability
<0.5%.
Stable time
<10ms.
Filament configuration
DC filament drive
self corrected filament preheat settings with closed loop emission control and smart learning algorithm.
Filament output
0-6A, 5.5V, maximum.
Dual Speed Starter
High speed (180Hz) and low speed (60Hz) can be configured via the serial interface. Boost and Brake capability provided.
High-voltage connector
60kV, Clayrmont CA-3 type or equivalent
Optional communication interface
RS232、Ethernet (RJ45).
Grounding Point
M5 grounding stud provided on chassis.
Environmental
Operating 10̊to 40̊ Storage -40̊to 85̊
Humidity
20% to 85% RH, non-condensation.
Cooling
Convection cooled, no internal fan. Forced air cooling not requied.
Dimensions
Width 169.9mm, height 240.8Mm, depth 304.8mm.
Weight
About 10kg