TXR1010
Teslaman TXR1010 series high-voltage power supply is a special power supply for X-ray machines, whic integrates an adjustable filament power supply with an output DC voltage 5.5V current 0.3A to 3.5A. High voltage and filament current can achieve linear and steady rise. TXR1010 series power supply can also be connected to an external potentiometer to achieve remote control of output voltage and current, and has external voltage and current display, high voltage output overvoltage and short-circuit protection, safety interlock and other functions.
Typical Application：Liquid level detection, film thickness measurement, PCB board detection, Kevex, Oxford, RTW, Superior, Varian, Trufocus, Keyuwei and other brands of cathodic grounded X-ray tubes.
Reference Back to list
Features
- Output voltage from 25kV to 65kV
- Integrated adjustable filament power supply
- Overvoltage and output short circuit protection
- Voltage and current regulation function
- Remote control can adjust the emission current
- Safe interlock function
- It can be customized according to user requirements.
CONTACT US
Telephone：+86411-84754722
Mobile：+8615642371743
Wechat：15642371743
Email：chengxingqi@teslamanhv.com
URL：www.teslamanhv.com
Product Specifications
Input
DC24V±10%.
Send out
25kV, 30kV, 50kV, 65kV four maximum voltage outputs Optional, 0V to maximum voltage adjustable.
Voltage control
Inside the power supply
the multi-turn potentiometer that comes with the power supply can set the output voltage Set between 0V and the highest voltage.
External remote control
external 0 to 10V control signal can output from 0V Adjust to the highest output voltage.
Emission current control
Inside the power supply
the multi-turn potentiometer that comes with the power supply can power the electron beam current Set to 0A to the highest current.
External remote control
external 0 to 10V control signal can current the electron beam Set to 0A to the highest current.
DC filament power supply
The output current is 3.5A adjustable and the voltage is 5.5V.
Voltage adjustment rate
Relative load
0.01% (no load to rated load).
Relative input
±0.01% (input voltage change is ±10%).
Current adjustment rate
Relative load
0.01% (no load to rated load)
Relative input
±0.01% (input voltage change ±10%).
Ripple voltage
Under rated output conditions, it is better than 0.1% p-p.
Ambient temperature
0 to +50℃ when working, -20℃ to +80℃ when stored.
Temperature coefficient
Voltage and current are better than 100ppm/℃.
Stability
less than 0.05% every 8 hours after starting up for half an hour.
Voltage and current indication
0 to +10V, the accuracy is 1% under rated output conditions.
External dimensions
100mm wide, 160mm high and 254mm wide.
High-voltage cable
High-voltage output connector
the recessed plastic insulation catheter and the probed high-voltage cable are connected by a metal connector with a diameter of 16mm. The total length of the high-voltage cable is 1 meter.
Input and output connectors
DB9 contains control signals.
Remote control of output voltage and current
External potentiometer can be used to use the power supply.10VVoltage reference remotely controls the output voltage and current.
Remote voltage indication
J4Including0Arrive10VThe voltage and current indicator signals can be connected to various digital or pointer meters.