TXR1012
Teslaman TXR1012 series high voltage power supply is a special power supply for small volume X-ray machine.It integrates a filament power supply with an output DC of 5V and an adjustable current of 0.3 A to 3.5 A. High voltage and filament current can rise steadily.
TXR1012 series power supply can also be connected with external potentiometer to realize remote control of output voltage and current,and has the functions of external voltage and current display, high voltage output overvoltage and short circuit protection, safety interlock and so on. It can provide remote digital communication interface and realize RS-232 communication.
Typical Application：Liquid level detection, Thickness measurement, PCB board inspection,Kevex, Oxford, RTW, Superior,Varian, Trufocus,Cathode-grounded X-ray tube.
Reference Back to list
Features
- Maximum output voltage 50kV/65kV
- Adjustable integrated filament power supply
- Overvoltage and short circuit protection
- Voltage and current regulation
- Local and remote emission control
- Security interlock function
- DB15 Rs-232 Or Rs-485 Communication Policy Available
- OEM customized available
CONTACT US
Telephone：+86411-84754722
Mobile：+8615642371743
Wechat：15642371743
Email：chengxingqi@teslamanhv.com
URL：www.teslamanhv.com
Product Specifications
Input
DC24V ± 10%.
Output
50kV/65kV at 0 to 2mA to a maximum of 65 watts.
Voltage control
Inside the power supply
The multi-turn potentiometer of the power supply can set the output voltage between 0 and the highest voltage.
External remote control
The external 0 to 10V control signal can adjust the output from 0 to the maximum output voltage.
Emission current control
Inside the power supply
The multi-turn potentiometer of the power supply can set the electron beam current from 0 to the highest current.
External remote control
The external 0 to 10V control signal can set the electron beam current from 0 to the highest current.
DC filament power supply
The output current is 3.5A adjustable and the voltage is 5V adjustable.
Voltage regulation
Load
0.01% of output voltage no load to full load.
line
±0.01% for ±10% change in input voltage.
Current adjustment
load
0.01% of output current from 0 to rated voltage.
line
±0.01% for ±10% change in input voltage.
Ripple voltage
Under rated output conditions, the peak-to-peak value of ripple voltage is 0.1% of the maximum output voltage.
Environmental
Operational 0 ℃ to + 50 ℃. Storage -40 ℃ to + 85 ℃.
Temperature coefficient
below 100ppm/℃.
Stability
less than 0.1% every 8 hours after 1/2 hour warm-up.
Voltage and current monitors
0 to + 10Vdc proportional 0 to rated output. Accuracy ± 1%.
Dimensions
50kV
73.5 mm wide, 127mm high and 203.5 mm deep.
50kV(SIC options)
73.5 mm wide, 145mm high and 203.5 mm deep.
65kV(SIC options)
73.5 mm wide, 145mm high and 228 mm deep.
High Voltage Connector
The power supply comes standard with a recessed epoxy insulated duct and a probed high voltage cable connected by a 16mm diameter metal connector. Standard high voltage cable is 1 meter long, and other specifications of cables or joints can be customized.
Optional features
XCC XRM Compatible HV Cable GB Grid bias SIC Standard interface control