TIE0026(No source)
The TIE0026 series of high-voltage couplers from Teslaman, commonly known as DC high-voltage ripple measuring instruments, can extract the AC component from DC high voltage through the principle of capacitor blocking DC and AC coupling. It can extract and output the corresponding 0±300VAC from a 100kV DC input. Due to the use of high-voltage metallized film capacitors and the matching of high-stability high-voltage resistors, ripple levels up to 10mV can be measured, and the measurement bandwidth range can reach 20Hz to 20MHz. It has been verified by multiple devices and FLUKE brand 3ppm eight-and-a-half-bit high-precision multimeters and Tektronix high-precision oscilloscopes. This enables the measurement reliability of this device to reach 99.99%.
Reference Back to listFeatures
- AC coupling bandwidth: 20Hz-20MHz
- Input voltage DC: 0±100kV
- Output voltage AC: 0±300V
- Measurable ripple: better than 10mV
- Attenuation ratio: 0.9@20Hz-50Hz; 0.985 @50 hz - 20 MHZ
- Input impedance: > 1GΩ
- Output impedance: 50Ω
CONTACT US
Telephone：+86411-84754722
Mobile：+8615642371743
Wechat：15642371743
Email：chengxingqi@teslamanhv.com
URL：www.teslamanhv.com
Product Specifications
Input voltage DC
DC
0±100kV.
Output voltage AC
AC
0±300V.
AC coupler band width
20Hz-20MHz.
Measured ripple
Better than 10mV.
Attenuation ratio
0.9@20Hz-50Hz;0.985@50Hz-20MHz.
Input Impedance
>1GΩ.
Output Impedance
50Ω.
Environmental
0℃ to +50℃.
Humidity
<80%.
Dimensions
W380mm,H145mm,D550mm.
Weight
47kg.
Accessories
BNC male to BNC male connector - 1,ground wire - 1,HV cable - 2.