TIE0001 High precision high voltage divider
TIE0001 high-precision high-voltage voltage divider is mainly used for high-voltage measurement under ultra-low ripple and high stability requirements. It adopts potential shielding voltage division methods such as resistance capacity, with high input impedance and good linearity. It adopts special shielding technology to reduce the impact of high voltage on the display value, so as to achieve high stability and high linearity.
Reference Back to list
Features
- Input: AC220V±10%
- 50/60Hz.
- Voltage Level: DC:100kV
- Stability: 5ppm
- Accuracy: DC:0.5%
- Temperature:-25〜40°C
- Humidity: <85%
- Separation ratio:10000:1
CONTACT US
Telephone：+86411-84754722
Mobile：+8615642371743
Wechat：15642371743
Email：chengxingqi@teslamanhv.com
URL：www.teslamanhv.com
Product Specifications
Usage Method
1
Securely ground the grounding end of the voltage
divider.
2
Connect the high-voltage wire above the average
pressure ball and tighten the high-voltage wire
with a wiring screw bolt.
3
Insert the high-frequency plug on the instrument
base into the digital display file. The
corresponding test can be carried out at this point.
4
After the test is completed, cut off the high
pressure and make sure that there is no high
pressure before entering the site.
5
When measuring DC, if there is a filter capacitor,
the filter capacitor should be fully discharged so
that the reading indicated by the digital display
meter is "0000" before the relevant operation can
be done.
6
In use and maintenance, attention should be paid
to the cleaning of the surface of the voltage
divider to prevent filth. This instrument should be
placed in a dry place and properly kept.
Precautions
1
In use, 100KThere must be no debris within 2
meters around the V divider. Keep a long
distance between the instrument and the divider
and strictly maintain a safe operating distance.
2
Adhere to the principle of holding and placing
gently, and do not collide, squeeze, etc.
Accessory Part
1RootCoaxial cable test line, 1 grounding wire.