THP2341
Teslaman THP2341 series is a high performance 19 "standard rack-mounted high voltage power supply. The digital control mode can meet the functional requirements of customers' various control settings. The nanosecond arc transient response capability ensures that the power supply runs without faults, and the efficiency reaches more than 90%. This series of products have complete functions and wide output range, and can also add the functions that customers need to customize through software.
Typical Application：Ion implantation, Electrostatic spraying, Electrostatic electret,Withstand voltage test, Particle acceleration, Electrostatic field,Ion beam power supply,Electron beam power supply,Accelerator power supply,Insulation test, Shore base of deep-sea observation network,High voltage capacitor charging,High voltage power taking,Scientific research, etc.
Reference Back to list
Features
- Output Voltage 250kV
- Output Power2.5kW-12kW
- Solid Encapsulation
- Soft-Switching、 Digital Programming
- Voltage and Current Regulation Function
- Protection Value Adjustable
- Nano Second Response
- Over-Voltage、 Over-Current、 Short Circuit、 Arc and Over-Temperature Protection
- OEM Available
CONTACT US
Telephone：+86411-84754722
Mobile：+8615642371743
Wechat：15642371743
Email：chengxingqi@teslamanhv.com
URL：www.teslamanhv.com
Product Specifications
Input
AC380V±10%,50/60Hz.
Output
Maximum output voltages could be designed from 250kV, and the maximum output power is 12kW. 0 to the highest voltage continuously adjustable, output positive and negative single polarity, higher voltage level can be customized.
Front Panel Status Indication
high-voltage on/off, voltage and current mode, output positive or negative single polarity, over-voltage, over-current, short circuit, arc and over-heat protection, memory, reset, actual value, set value, protection value, custom function key status indication, power supply also has error code display function.
Voltage Control
Local control
The rotary encoder of the power supply can set the output voltage between 0 and the highest voltage.
External control
The external 0 to 10V control signal can adjust the output voltage from 0 to the maximum output voltage.
Digital communication control
Through RS-485 communication interface,the output voltage can be adjusted from 0 to the highest voltage according to the standard Modbus communication protocol.
Current Control
Local control
The rotary encoder included in the power supply can set the output current between 0 and the highest current.
External control
The external 0 to 10V control signal can adjust the output current from 0 to the maximum output current.
Digital communication control
Through RS-485 communication interface,the output current can be adjusted from 0 to the highest current according to the standard Modbus communication protocol.
Voltage Regulation
Load
0.01% of output voltage no load to full load.
Line
±0.01% for ±10% change in input voltage.
Current Regulation
Load
0.01% of output current from 0 rated voltage.
Line
±0.01% for ± 10% change in input voltage.
Ripple Voltage
Under rated output condition, ripple voltage is 0.1%p-p of the maximum output voltage.
Environmental
Operational
0 ℃ to + 50 ℃.
Storage
-20 ℃ to + 80 ℃.
Temperature Coefficient
0.01% per ℃.
Stability
less than 0.05% every 8 hours after 1/2 hour warm up.
Weight
1kV-120kV
70kg.
225kV-250kV
280kg.
Voltage and Current Indication
four-bit LED nixie tube, with accuracy of 1% under rated output conditions.
Remote Voltage and Current Indication
25-pin terminal contains 0 to 10V voltage and current indication signals, which can be externally connected with various digital or pointer meters.
Dimension
1kV-120kV
W 482.6mm，H 266mm，D 647mm.
225kV-250kV
W 450mm，H 400.5mm，D 1195mm.
High Voltage Cable and Connectors
1kV-120kV
The recessed plastic insulated conduit and the probe high-voltage cable are connected through metal connectors, and the standard high-voltage cable is 2 meters long.
225kV-250kV
The recessed plastic insulated conduit and the probe high-voltage cable are connected through nylon connectors, and the standard high-voltage cable is 2 meters long.