TD2200
Teslaman TD2200 series is a high performance 19 "standard rack-mounted high voltage power supply. Operating with digital control, which can meet the functional requirements of customers' various control settings. The nanosecond arc protection response ability ensures the power supply to run without faults, and the built-in PFC circuit makes the power factor reach more than 0.99. Air natural convection cooling is adopted to dissipate heat. This series of products have complete functions, wide input and output range, and can also add the functions that customers need to customize through software.
Typical Application：Ion implantation, Electrostatic spraying, Ion beam power supply, Electron beam power supply, Accelerator power supply, Hi-POT test, High voltage capacitor charging and discharging, other scientific research, etc.
Reference Back to list
Features
- Soft Switching
- Output Voltage 1kV-100kV
- Output Power 600W
- Digitally Programmable
- Nanosecond Protection Response
- Over-Voltage
- Over-Current
- Short Circuit And Arc Protection
- RS-485 Isolated Digital Communication
- Secure Interlocking Function
- Built-in Active PFC
- Low Ripple 0.1% VP-P (Optional)
CONTACT US
Telephone：+86411-84754722
Mobile：+8615642371743
Wechat：15642371743
Email：chengxingqi@teslamanhv.com
URL：www.teslamanhv.com
Product Specifications
Input
AC220V ± 10%, 50/60 Hz, max 16A.
Output
Maximum output voltages could be designed from 1kV to 100kV, and the maximum output power is 600W. 0 to the highest voltage is continuously adjustable, and the output is positive or negative single polarity.
Voltage control
Local control
The power supply comes with a rotary encoder to set the output voltage between 0 and the highest voltage.
External analog control
The external 0 to 10V control signal can adjust the output from 0 to the highest output voltage.
Digital communication control
Through RS-485 communication interface, the output can be adjusted from 0 to the highest voltage according to the standard Modbus communication protocol.
Current control
Local control
The power supply comes with a rotary encoder to set the output current between 0 and the highest current.
External analog control
The external 0 to 10V control signal can adjust the output from 0 to the maximum current.
Digital communication control
Through RS-485 communication interface, the output can be adjusted from 0 to the maximum current according to the standard Modbus communication protocol.
Front Panel Status Indication
high-voltage on/off, voltage or current mode, output positive or negative single polarity, over-voltage, over-current, over-temperature, arc protection, memory, reset, actual value, set value, protection value, custom function key status indication, error code display function.
Voltage regulation
Load
0.01% of output voltage no load to full load.
Line
0.01% for 10% change in input voltage.
Current regulation
Load
0.01% of output current from 0 to rated voltage.
Line
0.01% for 10% change in input voltage.
Ripple Voltage
Less than 1%p-p under rated output (0.1% optional).
Environmental
operational
0 ℃ to + 50 ℃. Storage
Temperature coefficient
0.01% per ℃.
Stability
less than 0.1% every 8 hours after 1/2 hour warm-up.
Voltage and current indication
four-bit LED nixie tube, with accuracy of 1% under rated output conditions.
Overall dimensions
482mm wide, 88mm high and 320mm deep.
Connector
Recessed plastic insulated conduit and probed high voltage cable are connected by metal connector with diameter of 16mm/28mm. The standard high voltage cable is 2 meters long.
Weight
About 10kg.