TD2321
Teslaman TD2321 series is a high performance 19"standard rack-mounted high voltage power supply. Ripple less than 0.05%rms. Nanosecond arc response capability ensures trouble-free operation of power supply, and full load efficiency reaches over 90%.This series of products have full functions and wide output range, and can also add custom functions through software.
Typical Application：Ion implantation, Electrostatic spraying, Electrostatic electret, Withstand voltage test, Particle acceleration, Electrostatic field, Ion beam power supply, Electron beam power supply, Accelerator power supply, Insulation test, Shore base of deep-sea observation network, High voltage capacitor charging, High voltage power taking, Scientific research, etc.
Reference Back to list
Features
- Output Voltage 1kv-150kV
- Output Power 2kW
- Ripple ≤0.05%rms
- Nanosecond Protection Response
- Over-voltage
- Over-current
- Short Circuit
- Arc And Over-temperature Protection
- RS-485 Isolated Digital Communication
- Safety Interlocking Function
- OEM Customization Available
CONTACT US
Telephone：+86411-84754722
Mobile：+8615642371743
Wechat：15642371743
Email：chengxingqi@teslamanhv.com
URL：www.teslamanhv.com
Product Specifications
Input
AC220V ± 10%, 50/60 Hz, 16A.
Output
A variety of maximum output voltages from 1kV to 150kV can be selected, and the maximum output power is 2 kW. 0 to the highest voltage is continuously adjustable, and the output is fixed polarity.
Front Panel Status Indication
High voltage on, high voltage off, voltage and current display, over-voltage, over-current, short circuit, arc and over-temperature protection, the power supply also has error code display function.
Voltage Control
Inside the power supply
The power supply comes with a rotary encoder to set the output voltage between 0 and the highest voltage.
External analog control
The external 0 to 10V control signal can adjust the output from 0 to the highest output voltage.
Digital communication control
Through RS-485 communication interface, the output can be adjusted from 0 to the highest voltage according to the standard Modbus communication protocol.
Current Control
Inside the power supply
The power supply comes with a rotary encoder to set the output current between 0 and the highest current.
External analog control
The external 0 to 10V control signal can adjust the output from 0 to the maximum current.
Digital communication control
Through RS-485 communication interface, the output can be adjusted from 0 to the maximum current according to the standard Modbus communication protocol.
Voltage Regulation Rate
Relative load
0.01% (no load to rated load).
Relative input
0.01% (input voltage change is ±10%).
Current Adjustment Rate
Relative load
0.01% (no load to rated load).
Relative input
0.01% (input voltage change is ±10%).
Ripple Voltage
Under rated output conditions, ripple voltage is 0.05%rms of the maximum output voltage (lower ripple is available).
Environmental
Operational
0 ℃ to + 50 ℃.
Storage
-20 ℃ to + 80 ℃.
Temperature Coefficient
Voltage and current less than 100ppm/℃.
Stability
less than 0.1% every 8 hours after starting up for 0.5 hours.
Voltage and Current Indication
Four-bit LED digital tube, with an accuracy of 1% under rated output conditions.
Overall Dimensions
1kV to 2kV
482mm wide, 133.5 mm high and 320mm deep.
3kV to 50kV
482mm wide, 133.5 mm high and 320mm deep.
51kV to 100kV
482mm wide, 133.5 mm high and 500mm deep.
101kV to 130kV
482mm wide, 133.5 mm high and 650mm deep.
131kV to 150kV
482mm wide, 178mm high and 660mm deep.
Connector
Recessed plastic insulated conduit and probed high voltage cable are connected by metal connector with diameter of 16mm/28mm.The standard high voltage cable is 2 meters long.
Weight
10 to 20kg.