TD2204
Teslaman TD2204 series is a high performance 19 "standard rack-mounted high voltage power supply. The digital control mode can meet the functional requirements of customers' various control settings. The nanosecond arc transient response capability ensures the power supply to run without faults, with a full load efficiency of 95% and a power factor of 0.83. This series of products have complete functions and wide output range, and can also add special functional requirements of customers through software.
Typical Application：Ion implantation, Electrostatic spraying, Electrostatic electret, Withstand voltage test, Particle acceleration, Electrostatic field, Ion beam power supply, Electron beam power supply, Accelerator power supply, Insulation test, Shore base of deep-sea observation network, High voltage capacitor charging, High voltage power taking, Scientific research, etc.
Reference Back to list
Features
- Output Voltage 1kV-50kV
- Output Power 4kW
- Digitally Programmable
- Nanosecond Protection Response
- Over-Voltage
- Over-Current
- Over-Temperature Arc Protection
- RS-485 Isolated Digital Communication
- Security Interlock Function
- OEM Customization Available
CONTACT US
Telephone：+86411-84754722
Mobile：+8615642371743
Wechat：15642371743
Email：chengxingqi@teslamanhv.com
URL：www.teslamanhv.com
Product Specifications
Input
3-phase AC380V ± 10%, 50/60 Hz, max 16A.
Output
Maximum output voltages could be designed from 1kV to 50kV, and the maximum output power is 4kW. 0 to the highest voltage is continuously adjustable, and the output is positive and negative single polarity.
Front Panel Status Indication
High voltage on/off, voltage and current mode, output positive or negative single polarity, over voltage, over current, over heat and arc protection, memory, reset, actual value, set value, protection value, custom function key state indication, power supply also has error code display function.
Voltage Control
Local control
The power supply comes with a rotary encoder to set the output voltage between 0 and the highest voltage.
External analog control
The external 0 to 10V control signal can adjust the output from 0 to the highest output voltage.
Digital communication control
Through RS-485 communication interface, the output can be adjusted from 0 to the highest voltage according to the standard Modbus communication protocol.
Current Control
Local control
The power supply comes with a rotary encoder to set the output current between 0 and the highest current.
External analog control
The external 0 to 10V control signal can adjust the output from 0 to the maximum current.
Digital communication control
Through RS-485 communication interface, the output can be adjusted from 0 to the maximum current according to the standard Modbus communication protocol.
Voltage Regulation
Load
0.01% of output voltage no load to full load.
Line
0.01% for 10% change in input voltage.
Current Regulation
Load
0.01% of output current form 0 to rated voltage.
Line
0.01% for 10% change in input voltage.
Ripple Voltage
Ripple Voltage RMS is 1% of the maximum output voltage under rated output conditions (low ripple is optional).
Environmental
Operational
0 ℃ to + 50 ℃.
Storage
-20 ℃ to + 80 ℃.
Temperature Coefficient
0.01% per ℃.
Stability
less than 0.1% every 8 hours after 1/2 hours warm up.
Voltage and Current Indication
Four-bit LED nixie tube, with an accuracy of 1% under rated output conditions.
Overall Dimensions
482mm wide, 133.5 mm high and 320mm deep.
Connector
Metal connector, the total length of standard high voltage cable is about 2 meters.
Weight
About 19kg.