TLP2041
Teslaman TLP2041 series is a high performance 19"standard rack-mounted high voltage power supply. The digital control mode can meet the functional requirements of customers' various control settings. The nanosecond arc transient response capability ensures that the power supply runs without faults, and the efficiency reaches more than 90%. This series of products have complete functions and wide output range, and can also add the functions that customers need to customize through software.
Typical Application：Ion implantation, Electrostatic spraying, Electrostatic electret, Withstand voltage test, Particle acceleration, Electrostatic field, Ion beam power supply, Electron beam power supply, Accelerator power supply, Insulation test, Shore base of deep-sea observation network, High voltage capacitor charging, High voltage power taking, Scientific research, etc.
Reference Back to list
Features
- Output Voltage 1kV-225kV
- Output Power 5kW-10kW
- Digital Programmable
- Nanosecond Protection Response
- Soft Switching
- Over-Voltage
- Over-Current
- Short Circuit
- Arc and Over-Temperature Protection
- Voltage and Current Regulation Function
- Voltage and Current Can Be Adjusted Remotely
- RS-485 Isolated Digital Communication
- OEM Customization Available
CONTACT US
Telephone：+86411-84754722
Mobile：+8615642371743
Wechat：15642371743
Email：chengxingqi@teslamanhv.com
URL：www.teslamanhv.com
Product Specifications
Input
AC 380V ± 10%, 50/60 Hz.
Output
Maximum output voltages chould be designed from 1kV to 225kV, and the maximum output power is 10kW. 0 to the highest voltage continuously adjustable, output positive and negative single polarity, higher voltage level can be customized.
Front Panel Status Indication
high-voltage on/off, voltage and current mode, output positive or negative single polarity, over-voltage, over-current, short circuit, arc and over-heat protection, memory, reset, actual value, set value, protection value, custom function key status indication, power supply also has error code display function.
Voltage Control
Local control
The rotary encoder of the power supply can set the output voltage between 0 and the highest voltage.
External control
The external 0 to 10V control signal can adjust the output voltage from 0 to the maximum output voltage.
Digital communication control
Through RS-485 communication interface, the output voltage can be adjusted from 0 to the highest voltage according to the standard Modbus communication protocol.
Current Control
Local control
The rotary encoder included in the power supply can set the output current between 0 and the highest current.
External control
The external 0 to 10V control signal can adjust the output current from 0 to the maximum output current.
Digital communication control
Through RS-485 communication interface, the output current can be adjusted from 0 to the highest current according to the standard Modbus communication protocol.
Voltage Regulation
Load
0.01% of output voltage no load to full load.
Line
±0.01% for ±10% change in input voltage.
Current Regulation
Load
0.01% of output current from 0 rated voltage.
Line
±0.01% fro ± 10% change in input voltage.
Ripple Voltage
The RMS value of the ripple voltage is 0.7% of the maximum output voltage and 1.6% of the peak-to-peak value (0.1% Vp-p is optional) under rated output conditions.
Environmental
Operational
0 ℃ to + 50 ℃.
Storage
-20 ℃ to + 80 ℃.
Temperature Coefficient
0.01% per ℃.
Stability
less than 0.05% every 8 hours after 1/2 hour warm up.
Weight
About 70kg.
Voltage and Current Indication
four-bit LED nixie tube, with accuracy of 1% under rated output conditions.
Remote Voltage and Current Indication
25-pin terminal contains 0 to 10V voltage and current indication signals, which can be externally connected with various digital or pointer meters.
Overall dimensions
482.6 mm wide, 266mm high and 647mm deep.
High Voltage Connector
Recessed plastic insulated conduit and probed high voltage cable are connected by metal connector. Standard high voltage cable is 2 meters long.