TLP2081
Teslaman TLP2081 series is a high performance 19 "standard rack-mounted high voltage power supply. The digital control mode can meet the functional requirements of customers' various control settings. The nanosecond arc transient response capability ensures that the power supply runs without faults, and the efficiency reaches over 94%. This series of products have complete functions and wide output range, and can also add the functions that customers need to customize through software.
Typical Application：Ion implantation, Electrostatic spraying, Electrostatic electret, Withstand voltage test, Particle acceleration, Electrostatic field, Ion beam power supply, Electron beam power supply, Accelerator power supply, Insulation test, Shore base of deep-sea observation network, High voltage capacitor charging, High voltage power taking, Scientific research, etc.
Reference Back to list
Features
- Output Voltage 1kV-30kV
- Digitally Programmable
- Nanosecond Protection Response
- RS-485 Isolated Digital Communication
- Security Interlock Function
- The Output Power is 15kW
- in Parallel Could Reach 1MW
- Over-Voltage
- Over-Current
- Short Circuit
- Arc And Over-Temperature Protection
- Charging And Continuous DC Operation Modes Are Optional
- OEM Customization Available
CONTACT US
Telephone：+86411-84754722
Mobile：+8615642371743
Wechat：15642371743
Email：chengxingqi@teslamanhv.com
URL：www.teslamanhv.com
Product Specifications
Input
AC 380V ± 10%, 50/60 Hz.
Output
Maximum output voltages could be designed from 1kV to 30kV and the maximum output power is 15kW. 0 to the highest voltage continuously adjustable, output positive or negative single polarity, voltage level can be customized.
Voltage Control
Local control
The multi-turn potentiometer of the power supply can set the output voltage between 0 and the highest voltage.
External control
External 0 to 10V control signal can adjust the output from 0 to the highest output voltage.
Current Control
Local control
The multi-turn potentiometer of the power supply can set the current between 0 and the highest current.
External control
The external 0 to 10V control signal can set the current between 0 and the highest current.
Voltage Regulation Rate
Line
0.01% for 10% change in input voltage.
Current Adjustment Rate
Load
0.01% of output current from 0 to rated voltage.
Optional Capacitor Charging Mode
Peak charging power
24kW.
Energy storage
< 0.3 J. Pulse repetition accuracy is less than 0.1% at 100Hz.
Ripple Voltage
Ripple Voltage RMS is 1% of the maximum output voltage (0.1% Vp-p optional) under rated output conditions.
Environmental
Operational
0 ℃ to + 45 ℃.
Storage
-20 ℃ to + 80 ℃.
Temperature Coefficient
0.01% per ℃.
Stability
less than 0.1% every 8 hours after 1/2 hour warm up.
Overall Dimensions
482.6 mm wide, 266mm high and 666mm deep.
Weight
About 60kg.
Remote Control of Output Voltage and Current
External potentiometer can be used to control the output voltage and current remotely by using 10V reference voltage inside the power supply.
Remote Voltage and Current Indication
25-pin terminal contains 0 to 10V voltage and current indication signals, which can be externally connected with various digital or pointer meters.
Connector
Recessed plastic insulated conduit and probed high voltage cable are connected by metal connector with diameter of 16mm/28mm. The standard high voltage cable is 2 meters long.