TC4080
Teslaman TC4080 series high voltage power supply can be installed in 19 "standard cabinet. One high voltage output interface can output positive/negative high voltage, and the positive/negative high voltage can be switched by buttons on the panel, and the output high voltage can rise linearly and smoothly. The output voltage and current values are displayed through the LED display screen on the panel. TC4080 series power supply can also be connected with external potentiometer to realize remote control of output voltage and current, and can be connected with external voltage and current display. High voltage output has the functions of overvoltage and short circuit protection, safety interlock and so on.
Typical Application：Electrostatic separation, Electrostatic spraying, Capillary electrophoresis, Electrostatic flocking, Scientific experiments, etc.
Reference Back to list
Features
- Output Positive/Negative Voltage 1kV-50kV
- Digital Voltage and Current Display
- Overvoltage and short Circuit Protection
- Voltage and Current Regulation Function
- OEM Customization Available
CONTACT US
Telephone：+86411-84754722
Mobile：+8615642371743
Wechat：15642371743
Email：chengxingqi@teslamanhv.com
URL：www.teslamanhv.com
Product Specifications
Input
AC220V ± 10%, 50/60 Hz.
Output
A variety of maximum output voltages from 1kV to 50kV can be selected, and the maximum output power is 300W. 0 to the highest voltage can be continuously adjusted, and the positive and negative polarity of output voltage can be switched.
Polarity Switching
Internal power supply
The contact switch provided by the power supply can switch the positive and negative polarity of the output.
External remote control
The external signal can switch the positive and negative polarity of the output.
Voltage Control
Inside the power supply
The multi-turn potentiometer of the power supply can set the output voltage between 0 and the highest voltage.
External remote control
The external 0 to 10V control signal can adjust the output voltage from 0 to the highest output voltage.
Current Control
Internal power supply
The multi-turn potentiometer provided by the power supply can set the current from 0 to the highest current.
External remote control
The external 0 to 10V control signal can set the current from 0 to the maximum output current.
Voltage Regulation Rate
Relative load
0.01% (no load to rated load).
Relative input
0.01% (input voltage change is 10%).
Current Adjustment Rate
Relative load
0.01% (no load to rated load).
Relative input
± 0.01% (input voltage change ± 10%).
Ripple Voltage
Under the condition of output rated voltage, the peak-to-peak ripple voltage is 1% of the maximum output voltage (0.1% is optional).
Ambient Temperature
Working time
0 ℃ to + 45 ℃. Storage
Temperature Coefficient
0.01% per degree Celsius.
Stability
less than 0.1% every 8 hours after starting up for 0.5 hours (higher stability is optional).
Voltage and Current Indication
0 to + 10V, with an accuracy of 1% under rated output conditions.
Overall Dimensions
482.6 mm wide, 87.5 mm high and 443.6 mm deep.
Connectors
High Voltage Output Connector
Recessed epoxy insulated conduit and a probed high voltage cable are connected by a 16mm diameter metal connector. The standard high voltage cable is 2 meters long.
Input and output connector
25-pin terminal, including control and display signals.
Remote Control Of Output Voltage and Current
External potentiometer can be used to control the output voltage and current remotely by using 10V reference voltage inside the power supply.
Remote Voltage and Current Indication
The 25-pin terminal contains voltage and current indication signals from 0 to 10V, and can be externally connected with various digital or pointer meters.