TPS7001
Teslaman TPS7001 series is a low-ripple precision high-voltage power supply, which uses a 5-digit meter to display that the ripple voltage is less than 0.001％RMS at rated voltage. Adopting digital control mode can meet customers' requirements of various control functions, and the full-load efficiency can reach over 70%. This series of products has complete functions, high output precision, wide output range and small ripple, and can also be added with custom functions through software.
Typical Application：High energy particle injection, Electrostatic spraying, Ion beam power supply, Electron beam power supply, Accelerator power supply, Hi-POT test, high-voltage capacitor charging, scientific research, etc.
Reference Back to list
Features
- Output Voltage 0-10kV
- Output Power 50W
- 5-bit Display
- Ripple Voltage Is Better Than 0.001％RMS.
- Nanosecond Protection Response
- Over-Voltage/Over-Current Protection
- RS-485 Isolated Digital Communication
- Safety Interlocking Function
- OEM Customization Available
CONTACT US
Telephone：+86411-84754722
Mobile：+8615642371743
Wechat：15642371743
Email：chengxingqi@teslamanhv.com
URL：www.teslamanhv.com
Product Specifications
Rated Input Voltage
AC 220 V 10%, 50Hz.
Rated Voltage
10kV
Rated Current
5mA
Rated Power
50W
Ripple Voltage
less than 0.001%RMS at rated voltage.
Front Panel Status Indication
High voltage on/off, constant voltage, constant current, positive polarity, negative polarity, over-voltage and over-current, set value, protection value, reset lamp indication, and the power supply also has the function of displaying abnormal state codes.
Voltage Control
Local control
the power supply has its own rotary encoder, which can set the output voltage from 0 to the rated voltage.
External analog control
External 0 to 10V control signal can set the output from 0 to rated voltage.
Digital communication control
through RS-485 communication interface, the output can be set from 0 to rated voltage according to standard communication protocol.
Current Control
Local control
the power supply has its own rotary encoder, which can set the output current from 0 to the rated current.
External analog control
External 0 to 10V control signal can set the output from 0 to rated current.
Digital communication control
through RS-485 communication interface, the output can be set from 0 to rated current according to standard communication protocol.
Voltage Regulation
Load
0.01% of output voltage no load to full load.
Line
0.01% for 10% change in input voltage.
Current Regulation
Load
0.01% of output current from 0 to rated voltage.
Line
0.01% for 10% change in input voltage.
Environmental
Operational
0℃ to 50℃.
Storage
-20 ℃ to 80 ℃.
Temperature Coefficient
usually 100ppm per ℃.
Stability
It is less than 0.05% every 8 hours after 1/2 hour warm-up.
Humidity
10-90% without condensation.
Current Indication
5-digit LED nixie tube. Under the rated output condition, the error is 1% 1 word.
Protection
The power supply has basic protection functions such as over-voltage and over-current, and other required protection functions can be customized.
High Voltage Cable
A 40kV high-voltage line extends from the inside of the power supply. The standard high-voltage cable has a total length of 2m.
Overall Dimensions
218.5mm wide, 44.5mm high and 269.5mm deep.
Weight
2.7kg~2.8kg.