TRC2025
Teslaman TRC2025 series is a high performance 19" standard rack-mounted high voltage power supply with optional positive/negative voltage and continuously adjustable output voltage and current. The output high voltage can achieve linear and stable rise. TRC2025 series power supply can also be connected with external potentiometer to realize remote control of output voltage and current, and has the functions of external voltage and current display, high voltage output over-voltage and short circuit protection, arc protection, safety interlock and so on.
Typical Application：Ion implantation, Hi-POT test, Electrostatic electret, Withstand voltage test, Electric explosion, Electrostatic spinning, High voltage power taking, High voltage capacitor charging, Scientific research, etc.
Reference Back to list
Features
- Output Voltage 1kV-100kV
- Output Power 500W-1kW
- Over-Voltage
- Over-Current
- Short Circuit and Arc Protection
- Voltage and Current Regulation Function
- Voltage and Current Can Be Adjusted Remotely
- Digital Communication (optional)
- Security Interlock Function
- OEM Customization Available
CONTACT US
Telephone：+86411-84754722
Mobile：+8615642371743
Wechat：15642371743
Email：chengxingqi@teslamanhv.com
URL：www.teslamanhv.com
Product Specifications
Input
AC220V ± 10%, 50Hz.
Output
,The maximum output voltage could be designed form1kV to 100kV, and the maximum output power is 1kW. 0 to the highest voltage is continuously adjustable, and the output is positive or negative single polarity.
Voltage control
Local control
The multi-turn potentiometer of the power supply can set the output voltage between 0 and the highest voltage.
External remote control
The external 0 to 10V control signal can adjust the output from 0 to the highest output voltage.
Current control
Local control
The multi-turn potentiometer provided by the power supply can set the current from 0 to the highest current.
External remote control
The external 0 to 10V control signal can set the current from 0 to the highest current.
Voltage regulation
Load
0.01% of output voltage no load to full load.
Line
0.01% for 10% change in input voltage.
Current adjustment rate
Load
0.01% of output current from 0 to rated voltage.
Line
0.01% for 10% change in input voltage.
Ripple voltage
Ripple voltage RMS value of 0.5% of the maximum output voltage (0.1% Vp-p optional) under the condition of output rated voltage.
Environmental
Operational
0 ℃ to + 50 ℃.
Storage
-20 ℃ to + 80 ℃.
Temperature coefficient
0.01% per ℃.
Stability
less than 0.1% every 8 hours after 1/2 hour warm up.
Voltage and current indication
0 to + 10V, with an accuracy of 1% under rated output conditions.
Overall dimensions
1kV to 50kV
482mm wide, 133.5 mm high and 320mm deep.
51kV to 100kV
482mm wide, 133.5 mm high and 500mm deep.
Connectors
High Voltage Output Connector
Recessed epoxy insulated conduit and probed high voltage cable are connected by a 16mm diameter metal connector. The total length of standard high voltage cable is 2 meters.
Input and output connector
25-pin terminal, including control and display signals.
Remote control of output voltage and current
External potentiometer can be used to control output voltage and current remotely by using 10V reference voltage inside the power supply.
Remote voltage and current indication
25-pin terminal contains 0 to 10V voltage and current indication signals, which can be externally connected with various digital or pointer meters.