TD2110
Teslaman TD2110 series is a high performance 19"standard rack-mounted high voltage power supply. Applicable for burring, aging and other applications. Adopting digital control mode, it can meet the needs of customers for various control functions. Nanosecond arc response capability ensures trouble-free operation of power supply, and full load efficiency reaches over 90%. This series of products have complete functions and wide output range, and can also add custom functions through software.
Typical Application：Burring, electronic component testing, etc.
Reference Back to list
Features
- Output Voltage 1kV-150kV
- Maximum Energy 5J
- Operating Frequency 2Hz
- Nanosecond Protection Response
- Over-Voltage
- Over-Current
- Short Circuit
- Arc and Over-Temperature Protection
- RS-485 Isolated Digital Communication
- Secure Interlocking Function
- OEM Customization Available
CONTACT US
Telephone：+86411-84754722
Mobile：+8615642371743
Wechat：15642371743
Email：chengxingqi@teslamanhv.com
URL：www.teslamanhv.com
Product Specifications
Input
AC220V ± 10%, 50/60 Hz, 16A.
Output
Maximum output voltages could be designed from 1kV to 150kV, with energy of 5J. 0 to the highest voltage is continuously adjustable, and the output is positive or negative single polarity.
Front Panel Status Indication
high-voltage on/off, voltage and current display, over-voltage, over-current, short circuit, arc and over-temperature protection, power supply also has error code display function.
Voltage Control
Local control
The power supply comes with a rotary encoder to set the output voltage between 0 and the highest voltage.
External analog control
The external 0 to 10V control signal can adjust the output from 0 to the highest output voltage.
Digital communication control
Through RS-485 communication interface, the output can be adjusted from 0 to the highest voltage according to the standard Modbus communication protocol.
Current Control
Local control
The power supply comes with a rotary encoder to set the output current between 0 and the highest current.
External analog control
The external 0 to 10V control signal can adjust the output from 0 to the maximum current.
Digital communication control
Through RS-485 communication interface, the output can be adjusted from 0 to the maximum current according to the standard Modbus communication protocol.
Voltage Regulation
Load
0.01% of output voltage no load to rated load.
Line
0.01% for 10% change in input voltage.
Current Regulation
Load
0.01% of output current from 0 load to rated voltage.
Line
0.01% for 10% change in input voltage.
Environmental
Operational
0 ℃ to + 50 ℃.
Storage
-20 ℃ to + 80 ℃.
Temperature Coefficient
0.01% per ℃.
Stability
less than 0.1% every 8 hours after 1/2 hour warm up.
Voltage and Current Indication
Four-bit LED nixie tube, with an accuracy of 1% under rated output conditions.
Overall Dimensions
482mm wide, 178 mm high and 660mm deep.
Connector
Recessed plastic insulated conduit and probed high voltage cable are connected by metal connector with diameter of 16mm/28mm. The standard high voltage cable is 2 meters long.
Weight
10 to 20kg.