TT8010
Teslaman TT8010 series high- voltage power supply provides power up to 4kW, and the maximum output voltage can reach 450kV, and the whole range is adjustable. The power supply adopts a proprietary high-frequency resonant inverter, which enables it to operate reliably in extreme environments. The high- pressure pressure unit adopts a mixed design of air insulation, which reduces the overall size.
Typical Application：Ion implantation, particle accelerator, electronic gun.
Reference Back to list
Features
- 200-450kV output voltage is optional
- Low ripple
- High stability
- Overvoltage
- overcurrent
- short circuit
- arc and overtemperature protection
- OEM available.
CONTACT US
Telephone：+86411-84754722
Mobile：+8615642371743
Wechat：15642371743
Email：chengxingqi@teslamanhv.com
URL：www.teslamanhv.com
Product Specifications
Input
2kW
220VAC±10%, 16A, single-phase, 50/60Hz.
4kW
380VAC±10%, 16A, single-phase, 50/60Hz.
Output
A variety of maximum output voltages from 200kV to 450kV are available, with a maximum output power of 4kW. 0 to the highest voltage is continuously adjustable, and the output is positive and negative single polarity.
Suspended power supply module (optional)
suspended (5-10) A (maximum power 85W) adjustable DC power supply;
Voltage adjustment rate
Relative load
0.01% (no load to rated load).
Relative input
±0.01% (input voltage varies from ±10%).
Current adjustment rate
Relative load
0.01% (no load to rated load).
Relative input
±0.01% (input voltage varies from ±10%).
Ripple voltage
Under the rated output condition, it is better than 0.2% rms (lower ripple is optional).
Environmental
Working hours
0℃ to +50℃.
Storage time
-20℃ to +80℃.
Temperature coefficient
Voltage and current are better than 25ppm/℃.
Stability
After 0.5 hours of warm-up, the hour is less than 0.01%. Less than 0.05% every 8 hours.
Protection
Overvoltage, overcurrent, arc, overtemperature protection.
Size
Inverter drive rack
Width 482mm, height 267mm, depth 510mm.
High voltage unit
600mm x 1691mm x 800mm.
Communication interface
DB25, RS-485