TM6211
Teslaman TM6211 series is a high-voltage power,supply specifically designed for cable fault detection, suitable for outdoor cable fault detection scenarios. Its,unique grounding detection technology can prevent,the high-voltage power supply from working when the,equipment is poorly grounded, in order to avoid,equipment damage and personnel injury. It has two,control modes: analog control and CAN/RS485,communication control, which can meet the needs of,customers for various functions. The nanosecond arc,protection response capability ensures that the power,supply operates without faults, and the efficiency can,reach over 90%.
Typical Application：Capacitor Charging, Cable fault detection
Reference Back to list
Features
- Equipped with grounding detection function
- Input and output are not common ground
- Nanosecond level protection response
- Remote analog and remote CAN/RS485 communication control
- Overvoltage overcurrent short circuit and arc protection
CONTACT US
Telephone：+86411-84754722
Mobile：+8615642371743
Wechat：15642371743
Email：chengxingqi@teslamanhv.com
URL：www.teslamanhv.com
Product Specifications
Input
AC220V ± 10%, 50/60 Hz.
Output
1-32kV three output models, continuously adjustable from 0 to the highest,voltage, Maximum output power1.6kW Optional. Output positive and negative,single polarity.
Voltage Control
Analog control
The external 0 to 10V control signal can adjust the output from 0 to the highest voltage.
Digital control
RS485/CAN
Voltage Linear Adjustment Rate
<0.5%.
Load Adjustment Rate
<0.5%.
Environmental
Working
0°C to +50°C.
Storage time
-20°C to +80°C.
Stability
After 0.5 hours of preheating, it is less than 1% every 8 hours.
Appearance Size
Wide210Mm, high140Mm, deep275Mm.
Weight
8.65 Kilogram.
High Voltage Connector
The concave plastic insulated catheter and the incoming high-voltage cable are,connected through metal connectors with a diameter of 16 mm. Standard,high-voltage cable length is 2m.
Voltage and Current Analog Control
The external potentiometer uses the 10V reference voltage inside the power supply to control the output voltage and current.
Voltage Current Indicator
DB-15 terminal contains voltage and current indicator signals from 0 to 10V, which can be connected to various numbers or pointer meters.