TMX6108
Teslaman TMX6108 series is a high-performance high-voltage power supply featuring rapid polarity reversal, adjustable output, and high precision. It can quickly respond within 25ms and achieve polarity switching through a "hot swap" method. Utilizing advanced topology technology, the power supply boasts extremely low ripple, offering significant advantages in mass spectrometry analysis, particularly suitable for security detection systems, multiplier electrodes, sample ionization, capillary electrophoresis, and electrostatic printing applications. Moreover, the TMX6108 series is also applicable to Electron Ionization (EI) and Atmospheric Pressure Chemical Ionization (APCI) applications, meeting the stringent requirements of these fields. OEM customization services are available. With features such as rapid polarity switching, precise adjustment, low ripple, and high customizability, the TMX6108 series demonstrates outstanding performance and broad application prospects in the field of mass spectrometry analysis and related applications.
Typical Application：Mass spectrometry,capillary electrophoresis,electrostatic printing.
Reference Back to list
Features
- ±8kV
- polarity switch within 25ms
- Precise voltage and current monitor
- High stability
- Low ripple and noise
- High voltage inhibit function
CONTACT US
Telephone：+86411-84754722
Mobile：+8615642371743
Wechat：15642371743
Email：chengxingqi@teslamanhv.com
URL：www.teslamanhv.com
Product Specifications
Input
DC24V±10%,nominal continuous <0.5A,during reversing <1.2A
Output
0V to ±8kV Linearity not guaranteed below 200V. Maximum offset ±20V when programmed to zero or disabled using remote enable.), 0 to 100μA max.
Output Polarity
Remotely reversible via TTL logic signal
Polarity Reversal Time
<25ms from change of polarity command to 90% of output into 100pF load capacitance. (Unit incorporates circuitry to minimize the effects of low programmed current on reversing time. Polarity reversal time applies when current is programmed to 3μA or above.).
Regulation
Line
<0.1% for ±10% input voltage change
Load
<0.1% for 0 to full load
Ripple
<0.1% p-p @ 100μA
Temperature Coefficient
<100ppm per degree C
Environmental
Operating
5˚C to 45˚C
Storage
-35˚C to 85˚C
Humidity
10% to 85%, non-condensing
Stability
<0.05% per hour after 1 hour warm up
Protection
Arc and short circuit protected
Output Voltage Limit
Output voltage does not exceed ±8kV ±250V under any input or output conditions
Dimensions
W82mm, H37.6mm, D240mm.
Weight
1.1kg
Input Connector
14 way Molex receptacle p/n 39-01-2140. Cable length 508mm, mating connector not provided
Output Connector
Alden F303RX, mating connector not provided