TVS6073
TVS6073 is a modular high voltage power supply with adjustable/fixed output polarity, which is fully packaged and dedicated to system or workbench operation. The output voltage range is wide, up to 30kV. Output voltage is controlled locally through an internal multi-turn potentiometer with remote analog voltage or current programming capability. Analog monitoring output includes remote monitoring of high voltage and current output.
Typical Application：Spectrum, Detector, Electron beam system, General laboratory use.
Reference Back to list
Features
- Compact Model
- Voltage Up to 30kV
- High Stability
- Low Ripple and Low Noise
- Analog Control (Remote/Local)
- RS-232 Control (Digital Exclusive)
- Voltage And Current Monitoring
- Arc And Short Circuit Protection
- Provide OEM Customization
CONTACT US
Telephone：+86411-84754722
Mobile：+8615642371743
Wechat：15642371743
Email：chengxingqi@teslamanhv.com
URL：www.teslamanhv.com
Product Specifications
Input Voltage
AC
100-240VAC, 10%; 50/60 Hz; 1A.
DC
24VDC ± 10%, 2A.
Voltage regulation
Input
90-240VAC input voltage change, 0.005% of the maximum value. ± 10% VDC input voltage change, ± 0.005% of the maximum value.
Load
0 to the maximum rated output current change, 0. 01% of the maximum value.
Current Regulation
Input
90-240VAC input voltage changes, ± 0.05% of the maximum current. ± 10% VDC input voltage change, 0.05% of maximum current.
Load
0 to 0.2% of the minimum rated output voltage and the maximum current.
Ripple
Under the precondition of output rated voltage, the minimum ripple is 75mV, and the maximum ripple is 1.8 V.
Temperature Coefficient
≤ 50 ppm/℃.
Stability
0.5 hours after startup, ≤ 0.01%/hour, 0.02% every 8 hours.
Environmental
Operation
0 ℃ to + 50 ℃.
Storage
-40 ℃ to + 85 ℃.
Humidity
20% to 85% relative humidity, no condensation.
Local Control
The internal multi-turn potentiometer controls 0 to the maximum output voltage (0.2%).
Remote Programming
0 to + 5VDC analog input signals correspond to 0 to maximum rated output. The accuracy is ± (0.1% of the set value + 0.1% of the maximum value). The programmed input impedance is 20 M Ω.
Voltage Monitoring
0 to + 5V corresponds to 0 to the maximum output voltage. The accuracy is ± (0.1% of the readout value + 0.1% of the maximum value). The monitoring impedance is 10k Ω.
Current Monitoring
0 to + 5V corresponds to 0 to the maximum output current. The accuracy is ± (2.0% of the readout value + 1.0% of the maximum value). The monitoring impedance is 10k Ω.
Enable
Remote interlock enabled (low level) disables internal (high level) high voltage output. The signal is normally high, and the power supply is disabled by default.
Current Limit
All power supplies provide short circuit current limit, less than 110% of the maximum rated output current. Once the condition that caused the restriction is removed, the power will be restored automatically.
Arc/Short Circuit
short circuit and arc protection; Automatic recovery.
Cooling
Convective cooling.
Dimensions
AC input model
77mm wide, 132mm high and 179mm deep.
DC input model
59mm wide, 132mm high and 179mm deep.
Weight
AC input model
2kg.
DC input model
1.7 kg.