TMS6050
The TMS6050 Series is a compact high voltage power supply module that can be mounted on a printed circuit board (PCB), ranging from 1kV to 3kV, with positive or negative output polarity. Variable voltage programming through 0-10V signal is equal to 0-100% rated output voltage. Provide a 0-10V voltage monitoring signal. In addition, status signal and enable signal control are provided. All power supplies have built-in fault protection. The TMS6050 series is suitable for applications where compact high performance PCB mountable power supplies are required, such as driving electron multipliers in mass spectrometers. Aluminum housing helps shield this unit and reduce radiated noise.
Typical Application：Photomultiplier tube, Electron multiplier, Mass spectrometry analysis, Electrostatic lens, Nuclear instruments.
Reference Back to list
Features
- Compact High Performance Module
- Variable Voltage Programming
- Output Power 0.9 W
- Voltage Detection
- Arc and Short Circuit Protection
CONTACT US
Telephone：+86411-84754722
Mobile：+8615642371743
Wechat：15642371743
Email：chengxingqi@teslamanhv.com
URL：www.teslamanhv.com
Product Specifications
Input Voltage
+ 24VDC, ± 2VDC.
Input Current
The maximum input current is 150mA.
Output Polarity
Positive polarity or negative polarity can be specified.
Output Power
Max. 0.9 W.
Output Voltage Accuracy
± 1%.
Voltage Regulation
Input
21.6 VDC to 26.4 VDC, ± 0.02%.
Load
0-100% rated load, 0.02%.
Stability
0.05% per hour after warm-up for 1 hour.
Temperature Coefficient
10ppm/℃.
Stabilization Time
≤ 100ms after startup or activation, and within ≤ 2 seconds when power is cut off or high voltage is turned off, it will decay to less than 60V.
Protection
Arc and short circuit protection, not long-term arc.
Environmental
Temperature range
Operational
0 °C to 60 °C.
Storage
-20 °C to 70 °C.
Humidity
95% relative humidity, no condensation.
Cooling
Natural cooling.
Size
56.2 mm wide, 69.4 mm high and 30.7 mm deep.
Weight
About 200g.