TPCM6085
Teslaman TPCM6085 series high-voltage power supply adopts a compact design, has efficient adjustment ability, and can output low ripple high voltage.Compared with traditional high-voltage modules, the size of TPCM6085 series modules is greatly reduced, and advanced offline resonant converter technology is adopted. The resonant converter adopts a unique control scheme to maintain high efficiency while running at constant frequency. Zero current switch (ZCS) resonance control technology is used. The working frequency is usually 60.KHz.TPCM6085 series high-voltage power supply voltage and current can be Transfer. Monitoring and control signals are simple and flexible. TPCM6085 series high-voltage power supply input range is 85 -265VAC (50/60hz single-phase).Use active power factor correction.
Typical Application：PCB detection, electrostatic field,insulation voltage resistance test,detector, electrophoresis, cable test
Reference Back to list
Features
- Output voltage 50kV (other voltages can be customized)
- Output power 85W
- Power factor: better than0.99
- Digital programmable
- Overvoltage
- overcurrent
- short circuit
- arc and over-temperature protection
- Secure interlock function
- Can be customized according to user requirements.
CONTACT US
Telephone：+86411-84754722
Mobile：+8615642371743
Wechat：15642371743
Email：chengxingqi@teslamanhv.com
URL：www.teslamanhv.com
Product Specifications
Input
85 -265VAC, 50/60hz single-phase
Output
50kV, positive or negative polarity optional
Power factor
Full load
0.99
No load
0.98
Voltage control
External analog control
External 0 to 10V control signals can adjust the output from 0 to the maximum output voltage.
Digital communication control
Through the RS-485 communication interface, the output can be adjusted from 0 to the maximum voltage according to the standard Modbus communication protocol. Optional))
Current control
External analog control
The external 0 to 10V control signal can adjust the output from 0 to the maximum current.
Digital communication control
Through the RS-485 communication interface, the output can be adjusted from 0 to the maximum current according to the standard Modbus communication protocol. Optional))
Voltage adjustment rate
Relative load
0.01% (noload to rated load).
Relative input
±0.01% (input voltage change is ±10%).
Current adjustment rate
Relative load
0.01% (noload to rated load).
Relative input
±0.01% (input voltage change is ±10%).
Ripple voltage
Rated output conditions, better than 0.1‰p-p.
Ambient temperature
When working
0°C to +50°C.
Storage
-20°C to +80°C.
Temperature coefficient
Voltage and current are better than 100ppm/°C.
Stability
Less than 0.1% every 8 hours after 0.5 hours of booting.
Dimensions
126mm wide, 102.5mm high and 228mm deep.
High pressureCable
The standard high-voltage cable is 2 meters long,with a shielded layer and can be plugged in.
Weight
3kg.