TIE0026
The Tiesmann TIE0026 series high-voltage coupler is designed for precision high-voltage power supply ripple measurement. This model is an active version, featuring an integrated precision operational amplifier and an independent battery power supply system. The built-in operational amplifier provides extremely high input impedance (>1 GΩ) with minimal parallel input capacitance, maximizing the reduction of loading effects on the circuit under test, ensuring that the measured ripple faithfully reflects the original signal and avoids introducing additional voltage drops or noise. The operational amplifier also provides unity-gain buffering and driving capability, isolating the influence of downstream oscilloscopes and enabling long-distance coaxial cable driving. Battery power eliminates ground loop noise, ensuring accurate low-frequency ripple measurement. This product can measure ripple levels as low as 2 mV, with a measurement bandwidth ranging from 1 Hz to 2 MHz and a self- generated output noise of <2 mVpp. Before use, ensure that the battery is sufficiently charged (replace the battery promptly when the low battery indicator lights up), and the input voltage must not exceed the operational amplifier power supply rail range (0 ±5.5V).
Reference Back to listFeatures
- AC coupling bandwidth: 1Hz-2MHz
- Input voltage DC: 0±60kV
- Output voltage AC: 0±5.5V
- Measurable ripple: > 2mV
- Attenuation ratio: 0.95@1Hz-2MHz
- Input impedance: > 1GΩ
- Output impedance: 50Ω
CONTACT US
Mobile：+8615642371743
Wechat：15642371743
Email：yuhang@teslamanhv.com
URL：www.teslamanhv.com
Product Specifications
Input voltage DC
0±60kV.
Output voltage AC
0±5.5V.
AC coupler band width
1Hz-2MHz.
Measured ripple
>2mV.
Attenuation ratio
0.95@1Hz-2MHz.
Input Impedance
>1GΩ.
Output Impedance
50Ω.
Environmental
0℃ to +70℃.
Humidity
<80%.
Dimensions
W220mm,H130mm,D550mm.
Weight
25kg.
Accessories
BNC male to BNC male connector x 1,ground wire x 1,HV cable x 2.